Gaggia Cubika Plus,Gaggia Carezza Deluxe, Gran Gaggia Prestige,Saeco Aroma Filter Holder Seal
If water leaks around the filter holder during brewing, a worn group gasket is one of the most common causes and should normally be replaced first.
Common Symptoms This Part May Fix
- Water leaking around the filter holder during brewing
- Poor sealing between the filter holder and group head
- The coffee holder locking too loosely or too tightly
- A hardened, split, flattened, or compressed group gasket
This genuine Gaggia Saeco group gasket seals the filter holder against the group head on compatible manual coffee machines. It is commonly fitted to Gaggia Cubika Plus, Gaggia Carezza Deluxe, Gran Gaggia Prestige and Saeco Aroma models, with further compatible models shown in the compatibility checker. Over time, heat, pressure, repeated locking and age can cause the gasket to harden, flatten, or lose its sealing ability.
Trusted by repair technicians and used in professional coffee machine repairs.
Important Information
If water is leaking from around the filter holder, we recommend replacing the group gasket first. At the same time, inspect the filter holder locking ring in the group head. The locking ring contains plastic guide rails that can wear over time and may prevent the filter holder from locking tightly enough to form a reliable seal.
If replacing the group gasket does not stop the leak and the plastic rails are visibly worn or the coffee holder still locks loosely, the next step is usually to replace the filter holder locking ring.
Group gaskets are wear items and we generally recommend replacing them every 4 years as part of routine servicing, even if there are no obvious signs of damage.
Compatibility
This gasket fits selected Gaggia and Saeco manual coffee machines, including Gaggia Cubika Plus, Gaggia Carezza Deluxe, Gran Gaggia Prestige and Saeco Aroma models. Please use the compatibility checker and exploded diagrams above to confirm your machine model and the correct part before ordering.
Manufacturer Part Numbers
145841500, 996530015809
Need Help Finding the Right Part?
Not sure which group gasket or filter holder locking ring you need? Contact us before ordering and our team will help you identify the correct parts for your machine model.
Common Questions
Should I replace the group gasket first if the filter holder is leaking?
Yes. In most cases, the group gasket is the first part to replace when water leaks from around the filter holder during brewing.
What should I check if a new group gasket does not stop the leak?
Inspect the filter holder locking ring in the group head. Its embedded plastic guide rails can wear over time, causing the filter holder to lock too loosely. If the rails are worn, replacing the locking ring is usually the next repair step.
Should I replace this gasket during routine servicing?
Yes. Replace it if it is hardened, split, flattened, compressed, or no longer seals correctly. We also generally recommend replacement every 4 years because group gaskets are wear items.
Will this fit my machine?
Use the compatibility checker and exploded diagrams above to confirm your machine model and the correct group gasket.
Is this a genuine part?
Yes. This is a genuine Gaggia, Saeco replacement group gasket.
If you are not sure what part you need please follow our Guide or Contact us here.
Please note we do not accept any kind of liability from incorrectly fitted parts. Wrongly fitted parts void warranty.
If you are not competent to carry out a repair, seek professional help here!
