Gaggia Or Orm 0080-20 In Silicone PTFE FDA
If your Gaggia Classic Pro steam wand is leaking from the joint between its upper and lower tubes, a worn O-ring may be one of the most common causes.
Common Symptoms This Part May Fix
- Steam or water leaking from the steam wand tube joint
- Leak between the upper and lower Pro steam wand tubes
- Loose or poorly sealing steam wand connection
- Worn, flattened, or damaged O-ring
This genuine Gaggia silicone PTFE/FDA O-ring is mainly used between the upper and lower tubes of the Pro steam wand fitted to compatible Gaggia Classic Pro, Classic EVO and Classic E24 machines. Depending on the coffee machine model, the same O-ring may also be used in other internal fittings and connections. Over time, heat, pressure, movement, and age can reduce its sealing performance and cause leaks.
Trusted by repair technicians and used in professional coffee machine repairs.
Important Information
We recommend replacing damaged, flattened, or hardened O-rings during repairs and servicing. Reusing a worn seal may result in leaks after reassembly.
O-rings are wear items and we generally recommend replacing them every 4 years as part of routine servicing to help maintain reliable sealing and reduce the risk of leaks.
Compatibility
This O-ring is mainly used between the upper and lower tubes of the Pro steam wand fitted to Gaggia Classic Pro, Classic EVO and Classic E24 machines. It may also be used in other locations on different compatible coffee machine models. Please use the compatibility checker above to confirm your machine model before ordering.
Manufacturer Part Numbers
996530013445
Need Help Finding the Right Part?
Not sure which O-ring you need or whether it fits your coffee machine? Contact us before ordering and our team will help you identify the correct part for your model.
Common Questions
Can this O-ring fix a leaking Pro steam wand?
Yes. If steam or water is leaking from the connection between the upper and lower steam wand tubes, a worn, flattened, or damaged O-ring may be the cause.
Is this O-ring only used in the steam wand?
No. Its main application is between the upper and lower tubes of the Pro steam wand on compatible Gaggia Classic machines, but it may also be used in other internal fittings and connections depending on the coffee machine model.
Should I replace this O-ring during repair?
Yes. If the original O-ring is damaged, flattened, brittle, or no longer seals correctly, we recommend replacing it. As O-rings are wear items, we also generally recommend replacement every 4 years during routine servicing, even if there are no obvious signs of damage. Reusing an old seal can sometimes cause leaks after reassembly.
Will this fit my machine?
Use the compatibility checker above to confirm your machine model and the correct fitting location.
Is this a genuine Gaggia part?
Yes. This is a genuine Gaggia replacement O-ring.
If you are not sure what part you need please follow our Guide or Contact us here.
Please note we do not accept any kind of liability from incorrectly fitted parts. Wrongly fitted parts void warranty.
If you are not competent to carry out a repair, seek professional help here!
